pins m a h i n e d c p r e c i s i o n pin receptacles for .015? - .025? diameter pins www.mill-max.com 516-922-6000 139 0385-0-15-xx-43-xx-10-0 press-fit in .046 mounting hole 0385 xxxx-0-15-xx-30-xx-10-0 solder mount in .055 min. mounting hole 1401/3185 3018-0-15-xx-30-xx-04-0 press-fit in .057 mounting hole 3018 4001-0-15-xx-43-xx-04-0 press-fit in .057 mounting hole 4001 3907-0-18-xx-30-xx-10-0 surface mount also available on 12mm wide carrier tape: 4,000 parts per 13? reel. order as: 3907-0-57-xx-30-xx-10-0 3907 1782-0-15-xx-43-xx-04-0 press-fit in .045 mounting hole 1782 4310-0-31-xx-43-xx-04-0 compliant press-fit in .040.003 plated hole. for .090 .130 thick board. 4310 8852-0-15-xx-30-xx-04-0 press-fit in .056 mounting hole 8852 5960-0-15-xx-43-xx-04-0 hex press-fit in .057 plated thru hole 5960 1385-0-15-xx-43-xx-10-0 surface mount 1385 8363-0-15-xx-35-xx-10-0 solder mount in .057 min. mounting hole 8363 specifications shell material: brass alloy 360, 1/2 hard contact material: beryllium copper alloy 172, ht dimension in inches tolerances on: lengths: .005 diameters: .002 angles: 2 order code: xxxx - x - xx - xx - xx - xx - xx - 0 basic part # specify contact finish: specify shell finish: 02 200 " tin/lead over nickel 01 200 " tin/lead over nickel 14 10 " gold over nickel 15 10 " gold over nickel 27 30 " gold over nickel select contact #30, #35 or #43 contact (data on pages 208 & 209) basic part number 1401-0 3185-0 depth n .145 .109 length l .165 .130
|